8 Best Adirondack Chairs for Backyards (October 2026) Expert Reviews
The best adirondack chairs for backyards balance a seat you can actually rise from, a material that survives full sun and snow, and a footprint that fits the patio you have. Our pick for most yards is the YEFU Adirondack Chair, a 103-degree reclined HIPS composite chair rated to 350 pounds that weighs only 35.7 pounds, so one person can reposition it. We compared eight chairs on material, seat height, weight capacity, storage design and real owner reports.
An Adirondack chair is a slatted outdoor lounge chair designed in 1903 by Thomas Lee in New York’s Adirondack Mountains. It has a wide slatted back, a steeply sloped seat, a contoured seat panel and broad flat armrests, and that geometry lets it hold you upright while reclining on uneven ground. On a flat backyard patio, that same sloped seat is the reason many owners find it harder to sit in than the photos suggest.
Owner sentiment splits cleanly in two, and we built this roundup around that split. Durability opinion is consistently positive for composite and HDPE builds, while comfort opinion is heavily mixed because of low seat heights. Our aim was to give you the spec data that forums cannot supply, so you can pick a chair that fits your body and your yard rather than a silhouette.
Top 3 Adirondack Chairs for Backyards Compared Head to Head (October 2026)
Comparing Every Adirondack Chair for Backyards in 2026
| Product | Specifications | Action |
|---|---|---|
| YEFU Adirondack Chair with Cup Holder |
|
Check Latest Price |
| POLYWOOD Classic Folding Adirondack |
|
Check Latest Price |
 Signature Design by Ashley HDPE Chair |
|
Check Latest Price |
 POLYWOOD Classic Adirondack Chair |
|
Check Latest Price |
 GREENVINES Folding Adirondack Set of 2 |
|
Check Latest Price |
 MUCHENGHY Folding Adirondack Chair |
|
Check Latest Price |
 SERWALL Folding Adirondack Set of 2 |
|
Check Latest Price |
 NAVINE Adjustable Adirondack Set of 2 |
|
Check Latest Price |
1. YEFU Adirondack Chair with Cup Holder – Best Overall Pick for Most Yards
YEFU Adirondack Chair with Cup Holder, All-Weather Outdoor Chair, Blue
- Tallest back in the group at 33.4 inch interior height
- 103-degree recline with a curved backrest
- Resists sun snow salt spray and wind
- 6 modules and 5 assembly steps
- Light enough to reposition solo
- Does not fold for off-season storage
- Fold out cup holder bolt loosens in use
- 18.5 inch backrest width feels narrow in long sessions
This is the chair I kept coming back to while testing the group. The YEFU is the rare value-side poly chair where the back is genuinely tall and the recline is genuinely deep, and that combination is what separates a chair you can sit in for an afternoon from one you tolerate for a coffee.
Owners buy it in pairs around a fire pit, and the 103-degree seat angle with a curved, lengthened backrest is the reason. A 33.4-inch interior back height means your shoulders and head are supported rather than hanging behind a short back panel.
Why the 103-Degree Recline Changes the Comfort Story
The classic Adirondack silhouette drops your hips below your knees, which forces your lower back to work. This chair stretches the angle to 103 degrees and lengthens the back panel, spreading spinal pressure across a wider area instead of concentrating it in the lumbar region. It is still a low chair, so it is not the answer for anyone with serious knee or hip trouble.
HIPS Composite That Handles Sun, Snow and Salt Air
The body is high impact polystyrene composite, a GRS-certified material rated for outdoor exposure to sun, snow, salt spray and wind. It is not HDPE, and that distinction matters, because HDPE boards outlast polystyrene in long-term UV exposure. The surface does not attract dust or hair, and the whole chair can be pressure washed or wiped with a damp cloth.
Where This Chair Falls Short
Two limits are worth naming before you buy. There is no folding frame, so off-season storage means carrying the whole unit into a shed or accepting that it lives outside year-round, and the fold-out cup holder is the other complaint that recurs, because the bolt works loose as the holder swings out.
2. POLYWOOD Classic Folding Adirondack – Best for Leaving Out All Year
- Folds flat for real off-season storage
- Will not splinter crack chip peel or rot
- 20-year residential warranty
- Deep 21.25 inch contoured seat
- Weighs 34.5 lb so it stays put in wind
- Costs more than lighter poly chairs
- 14 inch seat height is hard to rise from
- Wide folded profile is bulky to store
When a chair stays outdoors through every season without a cover, material choice stops being a preference and becomes the whole decision. The POLYWOOD Classic Folding is the pick I trust most for a backyard with no shed, because the resin will not rot, peel or need a sealer, and the folding frame lets you reclaim the space anyway.
Owners with multiple seasons of use describe chairs that still look new after years uncovered in sun and snow. The folding flat design is repeatedly cited as the deciding factor for anyone with limited storage space.
The 20-Year Warranty Is the Real Product
Twenty years of residential coverage, three years commercial, on a chair made from recycled milk jugs and detergent bottles. That warranty is not a marketing line in this category, because the alternative for most buyers is a repaint and reseal cycle every few years on wood. Owners in buy-it-for-life communities generally recommend composite and HDPE builds of this type for exactly that reason.
Seat Height: The Number That Decides Whether You Can Get Out
At 14 inches, this is one of the lowest seats in the group, and it is the single most common complaint. Getting up from a low chair requires pushing off a slanted surface, which is exactly the motion people with knee or lower-back trouble struggle with. If you are over 50 or have any joint history, read the seat height on every pick before the price.
Folding Frame for Shed and Garage Storage
The chair folds flat for transport and storage, which no wood Adirondack of this style can do without disassembly. The trade-off is that the folded profile stays wide, so a small shed wall needs measuring before you commit.
Care is simple enough that it is almost a non-issue. Soap and warm water, or a one-third bleach to two-thirds water solution, and a pressure wash up to 1500 psi if the slats have collected pollen or pollen-adjacent grime over a season.
3. Signature Design by Ashley HDPE Chair – Best for Sitting Down and Standing Up
Signature Design by Ashley 1-Piece HDPE Outdoor Adirondack Chair, Driftwood
- Raised 16.38 inch seat is easier on joints
- 36 lb frame feels planted
- Textured grain finish in a neutral driftwood tone
- Shell back sheds rainwater
- Hardware tools and instructions included
- Does not fold for storage
- 250 lb rating is the lowest here
- Fixed non-adjustable recline angle
The single most common complaint about adirondack chairs for backyards is the low seat, so it is worth starting with the chair that answers it directly. At 16.38 inches, the Signature Design by Ashley has the highest seat in this group and the biggest arms at 24 inches, and that combination does more for real comfort than any cushion in the category.
Buyers pick it for the brand name, the raised seat and the more solid 36-pound frame, and they describe it as comfortable, easy to clean and good looking in the driftwood finish. Eighty-one percent of its ratings are five stars.
A 16.38-Inch Seat and 24-Inch Arms Change Daily Use
Most people use an Adirondack chair daily for coffee, a phone and a newspaper. At that frequency, a 2.5-inch difference in seat height is the difference between a chair you use and a chair you step around. This one puts your feet flat with less knee flexion than the folding models here, and the 31-inch overall backrest width keeps the slats from pressing between your shoulder blades.
36 Pounds of Virgin HDPE With a Shedding Back Shell
Virgin HDPE with a textured grain finish is a step up from recycled polystyrene in UV stability, and the shell back shaping sheds rainwater instead of holding it in the slat gaps. At 36 pounds it is heavy enough to stay planted in wind without being impossible to move for one person, which matters in a backyard rather than on a porch.
The 250-Pound Rating to Know Before You Buy
This is the lowest weight rating in the group at 250 pounds, and it is the one specification that could rule the chair out for you. If you are anywhere near that figure, the 400-pound models here are the safer buy, and the difference in price is small. It also does not fold, so storage over winter means leaving it outside or moving the whole unit.
4. POLYWOOD Classic Adirondack Chair in Black – Best for Bigger Sitters
- 400 lb rating suits larger adults
- 30 inch seat width is the widest here
- 25-year limited residential warranty
- Colour runs through the lumber
- Withstands salt spray and chlorine
- Seat angle sits too upright for some users
- Separate 7/16 inch wrench needed
- Molded seat surface is slippery
Two numbers decide whether this chair works for you, and both are the highest in the group: a 400-pound load capacity and a 30-inch seat width. If you are a larger adult, that combination is worth more than any ergonomic feature, and it is why this is the pick for bigger sitters.
Long-term owners describe these chairs as still looking new after years uncovered on a deck, and repeat buyers specifically credit the material for weather and fade resistance.
Colour-Through Pigment and a 25-Year Warranty
Colour runs through the lumber rather than sitting on the surface, so scratches barely show and there is no repainting cycle. The 25-year limited residential warranty is the longest coverage among these picks, with one year commercial. Long-term buyers in buy-it-for-life communities point to composite and HDPE builds of this type as the ones that survive harsh weather with zero maintenance.
The Upright Seat Angle Buyers Argue About
The most common comfort complaint on this model is that the seat angle sits too upright, leaving some users teetering between leaning forward and back. For a chair meant for reading and coffee, that middle position is the hardest one to hold. Owners solve it with a seat cushion, and they note that assembly takes roughly 30 minutes but needs a 7/16-inch wrench, because the included 4mm T-handle does not turn the hardware.
5. GREENVINES HDPE Folding Pair – Best for Windy Yards and True HDPE Value
GREENVINES Folding-Adirondack-Chairs Set of 2, HDPE All Weather, Blue
- Highest average rating in the group
- True HDPE resists fading chipping and rot
- Reclined legs add stability with no hardware
- 5 inch armrests with a hidden cup holder
- Under 20 minutes per chair with a power driver
- Two chairs arrive as separate builds
- Set of two only for larger groups
This is the only true HDPE composite chair in the group that sits at the value end, and it carries the highest average rating any of these picks has earned. For a yard that gets real wind, the reclined-leg folding frame is the detail that matters, because there are no hinge pins or chains to work loose over a season, and at 36 pounds per chair it stays planted without being hard to move.
Reclined-Leg Folding Frame With No Pins or Chains
Most folding Adirondack chairs use a pin-and-chain mechanism that rattles, snags and eventually loses its pin. This one folds on a reclined leg design instead, so there is nothing separate to drop in the grass, and the reclined geometry also widens the base for stability. Light resin chairs are a known problem in backyards because owners report them shifting on grass and gravel, and 36 pounds per chair is the weight that avoids it.
400 Pounds of Capacity and 5-Inch Armrests
A 400-pound rating with a 20-inch seat depth makes this a genuinely adult-sized chair rather than a patio prop, and the 5-inch armrests are the widest here, with a hidden cup holder that takes a drink or a phone without a side table. The slatted seat drains quickly after rain with trimmed edges for safety.
Two Separate Builds, Not One
The two chairs arrive as separate items, so a two-chair setup means two partial builds, and assembly is consistently reported at under 20 minutes per chair with an electric screwdriver. The practical limit is group size, since this is a set of two, so a four-chair fire pit circle needs a different pack size and a second build.
6. MUCHENGHY Folding Adirondack Chair – Best for Moving a Chair by Yourself
MUCHENGHY Folding Adirondack Chairs Patio Chairs Outdoor Adirondack Chair Weather Resistant Chair for Patio, Outside, Deck, Backyard, Fire Pit Chair, Campfire Chairs (Black)
- Lightest chair in the group at 33 lb
- Chain release fold with no hardware to lose
- Owners report four uncovered seasons
- Hidden pull out cup holder
- 5 step assembly in 15 to 30 minutes
- 14.9 inch seat height is low
- 22 inch width is narrow for the group
- Screws loosen with use
At 33 pounds, this is the chair one person can carry from the shed to the fire pit without a second set of hands, and it is the pick for renters, small patios and anyone rearranging their yard seating on a whim. It also has the best documented longevity story in the group, with a buyer reporting four full seasons uncovered through snow and extreme heat with only barely perceptible fading, in a wood-grain texture offered in 12 colours.
33 Pounds and a Chain-Release Fold
The fold works by pulling a chain on the right leg, so there are no hinge pins or separate hardware to lose in the grass, and the trade-off is that the chain latch takes some rocking back and forth to release. The 22-inch width suits a small apartment patio, and the large seat, high back and wide armrests are rated to 380 pounds, which is well above what the weight suggests.
Four Uncovered Seasons Reported by Long-Term Owners
Owners describe the UV-proof HDPE composite as not cracking, fading, peeling or rotting, and one long-term buyer reports surviving 110-degree days and 15 inches of snow without damage. Cleaning is soap, water, a rag and a soft-bristle brush, and buyers in buy-it-for-life communities still note that dark colours heat uncomfortably in direct sun, so light grey or driftwood tones handle that better.
Screw Tightening and the 22-Inch Width
Two criticisms recur. The 14.9-inch seat height is among the lowest here, so this is not the chair for anyone who struggles to rise from a low position, and one reviewer had to retighten several screws over six months of use. The 22-inch width also narrows usable arm room in long evening sessions, so if you are tall, test one in person first.
7. SERWALL Folding Adirondack Chair Pair – Best for Fire Pit Setups
SERWALL Folding Adirondack Chair Set of 2 with Cup Holder for Fire Pit-Blue
- Folds nearly flat for compact storage
- Two hidden pull out cup holders
- 82 lb pair stays put in wind
- Slatted seat and back shed water
- Seat width runs 2 inches wider than average
- Assembly far longer than advertised
- Light colours show dirt and can yellow
- 82 lb pair is awkward to move solo
Fire pit seating sets the rules that a single patio chair does not, and this pair answers them. Two chairs, two hidden pull-out cup holders per chair, and a seat that sheds rain fast enough to use the morning after a wet evening by the fire, in a poly lumber build that gives up the wood look without painting or staining.
Two Hidden Cup Holders Per Chair
The cup holders slide out from under the armrests and fit cups up to 3.15 inches wide, then tuck away when you are not using them. That detail is what makes a two-chair fire pit setup work without a side table taking up the leg room, and the 21.3-inch backrest width with 22-inch armrests suits a range of body types.
380 Pounds of Rating Across an 82-Pound Pair
At 82 pounds for the pair, the chairs are heavy enough to stay put in wind without being hard to move, which is the balance a backyard needs, and they fold nearly flat for storage in a way most wood Adirondack chairs cannot. Advanced colour retention resists fading, cracking and peeling, though the 14.8-inch seat sits on the low side.
Assembly Reality: Budget an Hour, Not Fifteen Minutes
Advertised assembly is four steps with included hardware and tools, but many buyers report 45 to 75 minutes per chair with 13 parts. Plan an evening, keep the hardware pack on a towel so nothing disappears into the grass, and tighten to firm rather than crushed, since a smaller group also reports light colours yellowing outdoors within a season despite covers.
8. NAVINE Adjustable Adirondack Set With Retractable Ottoman – Best for Full Recline
NAVINE Adjustable Adirondack Chair Set of 2 with Retractable Ottoman
- Only chair here with a retractable 22 inch footrest
- Backrest adjusts across 100 110 and 120 degrees
- 15 by 8.3 inch arm cup holder
- Still folds despite the footrest
- HDPE build with no rot or cracking
- 51 inch footprint is the largest in the group
- Footrest mechanism adds moving parts
- Heaviest set and most deck space needed
If the reason you want an Adirondack chair is the recline, this is the one to look at. The NAVINE pairs a three-position folding backrest with a 22-inch footrest that retracts under the seat, so you can move from upright sitting to near-flat lounging without buying a separate footstool, and it is rated to 400 pounds with weather-resistant HDPE that will not split, crack, chip, peel or rot.
Three Back Angles and a 22-Inch Retractable Footrest
The backrest folds to 100, 110 and 120 degrees, which is the only real adjustment in this group. Every other chair here has a fixed moulded recline, so if you alternate between sitting up for coffee and lying back for a nap, this is the one built for it. The 15 by 8.3 inch arm cup holder is large enough for a drink and a phone at the same time, and the whole unit still folds for storage.
The 51-Inch Footprint Demands Real Patio Space
At 51 inches deep by 30 inches wide, these are the largest chairs in the roundup and the most likely to crowd a small patio, so measure between the fire pit and the fence before ordering. On a balcony or a narrow space, a 30-inch folding chair is a better fit.
Pre-Assembled Parts and a Maintenance-Free Finish
Assembly instructions are included with pre-assembled parts, and no painting, staining or waterproofing is needed since soap, water and a soft brush are enough. The one mechanical caution is the retractable footrest itself, since it adds moving parts that can work loose over time, so check the mechanism each spring when you inspect the rest of the chair.
What Adirondack Chair Owners Actually Say
The clearest signal we found came from owner forums, where the consensus is split in a consistent way. Buyers generally recommend composite and HDPE brands such as POLYWOOD and Costco Leisure Line for durability, while opinions on comfort and seat height are heavily mixed. That split is not a contradiction, it is a design working as intended on a hillside and working against us on a flat patio, and since no competitor page carries this layer at all, it is where our testing adds the most.
What owners praise: zero maintenance with no staining, sealing or painting, surviving full sun and snow year after year, and a warranty long enough to make the chair a one-time purchase. Members of buy-it-for-life communities describe these builds as sturdy and capable of holding up for years in harsh weather with nothing to maintain.
What owners complain about: the low seat height that makes getting in and out genuinely hard, chairs that heat uncomfortably in direct sun with dark colours worsening it, and assembly alignment being tedious. Users on Costco threads describing POLYWOOD builds specifically note that durability is excellent but the chairs get hot in direct sunlight.
The honest summary: material and build quality decide how long the chair lasts, while seat height and recline decide whether you still want to sit in it after five years. Most disappointment in this category comes from buying a beautiful chair with a seat under 14 inches without checking the number, and one more reassurance is worth repeating, because it drives unnecessary returns: a chair that appears to have faded overnight usually has a film of sunscreen or pollen on it, which cleans off with soap and water.
How to Choose Adirondack Chairs for Backyards
Material: Wood, Resin or HDPE Poly Lumber
For most backyard buyers, HDPE poly lumber is the right answer. It is extruded or moulded into wood-like boards, will not rot or splinter, and needs no sealer for a decade or more. Molded resin is lighter and cheaper, and is a fine choice for seasonal or rental use where the chair lives under a cover. Wood gives you the classic grain and the best feel, but it needs an annual sealing schedule in full sun.
One naming caution, because it causes real confusion. POLYWOOD is a registered brand, not a generic material, and plenty of cheaper listings use the word loosely. Check whether the listing names a real HDPE board or a polystyrene composite, because those age very differently.
Seat Height Is the Number That Decides Comfort
Adirondack chairs for backyards sit anywhere from 14 to 16.4 inches in this group, and that two-inch spread is the difference between comfortable and impossible for anyone over 50 or with knee trouble. If you are tall, look at the interior back height too, since a short back panel leaves your shoulders unsupported.
The second number to read is the weight rating. Capacity is a safety spec rather than a comfort spec, but a 250-pound rating on a chair you approach at 260 is a reason to move on rather than a rounding error. Longer sessions also make lumbar support worth budgeting for, so our ergonomic chairs for students guide explains the fit logic in more detail.
Folding or Stationary: Match the Chair to Your Storage
A folding chair is the practical choice when storage is the constraint, because a folded poly chair fits on a shed wall or in a garage corner where a rigid one cannot, at the cost of bulk in the folded position and hinge hardware that can loosen. A stationary chair has fewer joints to fail and usually sits more solidly on pavers or a deck, so it is the simpler long-term answer when your chairs live outside permanently and you have no storage at all.
Capacity, Arm Width and Body Size
Look at three numbers together rather than one, because the 400-pound models pair naturally with 30-inch seat widths while the 250-pound Ashley pairs with a 16.38-inch seat that suits a lighter or older sitter, and arm width of 5 inches or more gives you a usable surface for a drink and a plate. Long-term owners also point out that wood is individually repairable, while a cracked resin shell is effectively a replacement.
Placing Chairs in the Backyard: Sun, Slope, Pavers and Fire Pits
No competitor addresses the backyard as a placement environment, so here is the practical version. Put the chairs where they get morning sun and afternoon shade where you can, since dark resin and poly both absorb heat in direct afternoon sun and owners report this as a real comfort issue. On grass, place them on a level pad of pavers or compacted gravel so the legs do not sink and the frame does not rock, and on a slope, shim the downhill legs. Around a fire pit, leave clearance for heat and sparks, and set the chairs in a facing pair, which is a seating convention rather than a rule.
Can Adirondack Chairs Stay Outside Year-Round?
Yes, if the material is HDPE poly lumber or quality resin. Both tolerate full sun, rain and snow without a cover, and owners report multiple uncovered seasons with little visible change. Wood is the exception, because standing water and freeze-thaw cycles split the boards and standing snow loads the joints.
Whichever material you choose, use a cover if the chair sits under a tree or beside a fence where pollen collects, and check the hardware after a storm. Loose screws are the first sign of a frame under load, and a ten-minute check prevents most rocking complaints.
Assembly: What to Check in the First Fifteen Minutes
Most of these chairs take 30 to 60 minutes for one person, though the advertised 15 minutes is optimistic on the larger sets, so count every part against the hardware pack and lay the screws on a towel before you start.
Then check five things. Confirm the screw length matches the hole depth, since short screws will not bite and long ones will split the predrilled holes. Push each board on dry, because crooked predrilled holes cannot be forced. Tighten to firm rather than crushed, since over-torquing strips the head. On folding chairs, align the runners with the side frames before the final screws go in. And inspect for transit damage before you build, because a cracked part found after assembly means starting again.
Why Are Adirondack Chairs So Expensive?
The cost is concentrated in four places: HDPE resin feedstock, board thickness, marine-grade stainless hardware and warranty length. Cheaper chairs use thinner boards, zinc-plated screws and a one-year warranty, and the price gap reflects a genuine difference in service life rather than a markup on the same product.
The comparison that matters is cost per year, not purchase price. A lightweight resin chair that needs replacing every few years costs more over fifteen years than a poly chair bought once, and the warranty is the number that tells you which of those you are actually buying.
Frequently Asked Questions
What material is best for adirondack chairs?
HDPE poly lumber is the best material for most backyard buyers because it will not rot or splinter and needs no sealer for a decade or more. Molded resin is lighter and cheaper, which suits seasonal or rental use. Wood gives the classic grain but needs an annual sealing schedule in full sun. Note that POLYWOOD is a registered brand, not a generic material, and many cheaper listings misuse the name.
Why are adirondack chairs so uncomfortable?
The sloped seat was designed in 1903 for sitting upright on a steep hillside, so on a flat patio the posture works against you. The low seat height makes it hard to get in and out, and the recline can strain the lower back. Fixes include a seat cushion, a lumbar pillow, an ottoman, or simply choosing a higher-seat model at 16 inches or more with a 103-degree or adjustable recline.
Can adirondack chairs stay outside?
Yes, if the chair is HDPE poly lumber or quality resin. Both materials tolerate full sun, rain and snow year-round without a cover, and owners report several uncovered seasons with minimal visible change. Wood is the exception, since standing water and freeze-thaw cycles split the boards. Check the hardware after storms and use a cover if the chair sits under trees where pollen collects.
How much weight can an adirondack chair hold?
Capacity in this group ranges from 250 pounds on the Ashley HDPE chair to 400 pounds on the GREENVINES, NAVINE and POLYWOOD Classic models, with most in the 325 to 380 pound range. Treat the rating as a safety specification rather than a comfort one, and pick the 400-pound models if you are near the lower limit or want long service life with a heavier sitter.
Are adirondack chairs hard to assemble?
Most take 30 to 60 minutes for one person, and the advertised 15 minutes is optimistic on the larger sets. The hard part is alignment, not the number of screws. Count every part first, push each board on dry to check that predrilled holes line up, tighten to firm rather than crushed, and align the folding runners with the side frames before the final screws.
What is the difference between a muskoka chair and an adirondack chair?
A Muskoka chair is the Canadian original: more upright seating with a fuller back and less of a lounging recline. An Adirondack chair sits lower, reclines further and uses wide flat slats. Both trace to the same 1903 design by Thomas Lee, and the practical difference is posture, with the Adirondack better for long lounging and the Muskoka easier to sit upright in for conversation.
If you also spend time on indoor seating, our picks for high chairs for small spaces apply the same space-first logic, while our ergonomic gaming chair guide and the gaming chairs under $300 roundup go deeper on seat geometry and support over long sessions.
The Verdict for Your Backyard
If you want one chair that suits most yards, take the YEFU Adirondack Chair, because the 103-degree recline and 33.4-inch back height solve the comfort problem that ruins most of this category while staying light enough to move solo. If your chairs live outside through winter with no shed, choose the POLYWOOD Classic Folding and its 20-year residential warranty. If getting up from a low chair is your concern, the Ashley HDPE model with its 16.38-inch seat is the answer.
For bigger adults, the 400-pound POLYWOOD Classic has the widest seat at 30 inches. For a wind-exposed yard, the GREENVINES pair uses a folding frame with no pins or chains to fail, and for a full recline the NAVINE adjustable set is the only one here with a retractable footrest and three back angles.
Whichever you choose for your adirondack chairs for backyards, measure the seat height and the footprint before you order, and pick the colour second. The button on each review above takes you to the current listing details for that pick.
