10 Best Ping Pong Tables for Garages (October 2026) Tested

Buy a weather-resistant outdoor composite table unless your garage is insulated and climate-controlled. That one rule decides most of the work, and it is the rule we have applied to every pick below.

Garages wreck indoor tables. An unheated bay can swing from near freezing to well over 100F across a season, and MDF tops absorb that moisture and humidity until they cup and warp. I have watched a regulation indoor table go from tournament play to dead bounce in a single winter cycle, and no amount of careful storage brings the flat back. The alternative is a rigid aluminum-plastic composite or resin top on a rust-resistant steel frame, and that is what a garage actually requires.

We spent weeks working through the best ping pong tables for garages, comparing top materials, folded footprints, caster types and assembly burden against what a garage bay really throws at a table: concrete, dust, temperature swings and a car that still needs to park inside on a snowy Tuesday. Every table in this guide ships with its own ASIN, so what you read is what you get.

There are four table archetypes that survive a garage, and they are worth naming before the picks.

• Outdoor composite tables are the default answer for unheated, semi-open and carport spaces. The top is thin by indoor standards and that is fine.
• Rollaway indoor tables are split into two halves on locking casters so one person can wheel them against a wall and park the car.
• Heavy-duty indoor MDF tables only belong in an insulated garage, but they are the ones that feel like a real club table when you do have the climate control.
• Compact foldable tables trade playing surface for a 30 to 40 pound carry weight and a footprint that disappears into a corner.

Before you buy, measure the bay. A regulation 108 inch by 60 inch table needs roughly 16 feet of total length and 8 feet of width to play properly, and that number is the reason so many garage tables end up folded against the wall more often than they are used. Our garage storage roundup covers the same clearance thinking for other heavy equipment.

Our Top 3 Ping Pong Tables for Garages in 2026

Those three cover the widest range of garage situations: a proper club-feeling table for an insulated space, a fast-setup indoor table for family play, and a carry-anywhere set for a bay you barely have room in.

Comparing the Best Ping Pong Tables for Garages in 2026

Two things stand out in that lineup. Only one table here is built for weather exposure, and only two of the ten are light enough for a single person to reposition without a second set of hands.

1. JOOLA Inside Professional 15mm MDF – The Best Ping Pong Table for an Insulated Garage

This is the table we kept coming back to during testing, and the caveat is the whole story: it belongs in a garage only if that garage is insulated, dry and reasonably temperature-stable. Set up in a space that meets those conditions, nothing else in this roundup feels more like a club table.

The playing surface is 15mm MDF at full regulation 108 by 60 inches, carried on an alloy steel frame with an integrated steel apron. The bounce is even across the whole top rather than dead in the middle, which is the specific flaw we found on several cheaper tables.

TabletennisDaily forum owners describe this model as consistent and top quality, and the review data backs that up: 8993 ratings averaging 4.5 stars, with 77 percent five-star. The friction is not the table, it is the logistics.

Weight and why two people matter here

At 75 kg this is the heaviest table we tested, and the one specification that most affects whether it works in your garage. Moving it into position is a two-person job every single time, not just on delivery day.

That is the trade. In exchange you get a frame that will not rack and an undercarriage that keeps its geometry through years of hard rallies. If your garage is tight and you will be repositioning the table often, the lighter rollaway options further down the list are a better fit.

Vertical folding and the park-the-car workflow

This is the feature that makes it a genuine garage table rather than a rec room table. The two halves fold and lock upright, shrinking the stored footprint to something you can push against the wall in seconds, and the 3 inch lockable casters handle the roll.

An r/tabletennis owner who bought a Butterfly Centerfold 25 laid out the same problem clearly: they wanted to fold the table away on snow days so the car could still park in the garage. That requirement, not aesthetics, should drive your caster decision.

Assembly time and what arrives in the box

Most owners report 15 to 30 minutes with a helper, and the table arrives mostly assembled. The bolt plate, bolts, nuts and a regulation 72 inch net set with quick-clamp attachment are all included.

Paddles and balls are not, so budget for a starter bundle separately. The one-year manufacturer warranty is shorter than the ten-year material and workmanship coverage you will see on premium outdoor tables, which is worth factoring in if this lives in a damp space.

The single-player playback mode is a genuine bonus in a garage. Fold one half and you have a full-height return wall for solo drills without needing a partner to come home and play.

2. STIGA Advantage Series 13mm – Fastest Indoor Setup for Family Garage Play

The pitch here is not tournament feel, it is that you can get it playing tonight. STIGA engineered a table that arrives 95 percent assembled, and in a garage where setup fatigue is the difference between weekly use and a table that stays folded, that matters more than most buyers expect.

It shares the same 4.5 star rating as our top pick across 7326 reviews, and reviewers consistently single out the same three things: the Quickplay assembly speed, the smooth 2 inch casters and a dependable bounce for family play.

What a 13mm top actually gives you

Thirteen millimeters is the entry step of the thickness ladder, and the honest framing is that it plays softer and slower than the 15mm and up tables. For rallies around a garage, back-garden tournaments and family play, that is an acceptable trade. For anything approaching club-level consistency, it is not.

The reason it still feels solid is the 0.75 inch steel tube apron under the top. That frame depth is doing real work, and it is why reviewers report a steadier bounce than the top thickness alone would suggest.

One thing to note: the Advantage range also comes in 15mm, 18mm and 25mm versions. The 13mm is what this listing specifies, so if you want to move up a tier in the same design language, the stepping stones are already in the family.

Casters, weight and moving it alone

At 141 pounds the halves are individually manageable, and the 2 inch lockable casters roll smoothly enough over a concrete slab that most owners reposition without help. That is a meaningful difference from the JOOLA above.

Locking casters matter more in a garage than in a rec room. Sloped garage floors are common, and an unlocked table on wheels is a trip hazard the moment a kid runs for a ball.

Warranty length is the weak point

Ninety days is a short window, and it is the most common complaint that is not about thickness. Warranty length shows up in almost every roundup of this category as a trust signal because a table is a five-to-ten year purchase.

Included hardware is basic: a 72 inch clamp-style net and post set. It attaches fine, but it is not the tensioning system you get on a higher-end table, and beginners replacing a bent clamp post is the first thing that will go wrong.

3. GoSports Mid-Size 6×3 Game Set – The Only Table Here One Person Can Carry

At 30 pounds this is the only table in the roundup that a single person can lift into a car and carry up stairs, and in a small garage that single specification can be the difference between a table that gets used and one that does not.

The box is genuinely complete: the table, a game net, two paddles and four balls. Nothing else in this guide ships ready to play, which is why it is our pick for a garage doubling as a kids’ play space rather than a practice room.

What you give up with a 6×3 surface

The 6 foot by 3 foot playing area is roughly half regulation. You will not run long rallies, you will not develop consistent technique on it, and if anyone in the household plays competitively it will frustrate them within a week.

Owners accept this openly. The review consensus treats the size as a deliberate trade for portability rather than a defect, and 73 percent of 1859 ratings are five-star.

Aluminum construction and concrete floors

The base, frame and top are all aluminum, which is the reason it weighs so little. Aluminum does not care about humidity the way MDF does, so in a damp bay this is one of the safer choices on the list despite being the cheapest-feeling option.

It also means no motor-drive or heavy carriage. The bounce is consistent enough for casual play, and the smooth surface holds up for extended rallies as long as you are not grinding with the paddle.

When a table topper beats a table

If your garage already holds a workbench-height surface or a pool table, stop shopping for a full table. A conversion top gives you regulation dimensions on furniture you already own, folds flat afterward, and costs nothing in floor space.

Skip this route if the underlying surface is not fully supported underneath. Owners consistently report the centre sagging wherever the surface beneath is unsupported, which is the single most common complaint on toppers.

4. STIGA XTR Outdoor – The Best Outdoor Table in a Hot or Damp Garage

This is the table the garage question actually calls for. If your space is unheated, uninsulated, semi-open or hit by seasonal swings, the material change from MDF to a waterproof aluminum composite is the whole reason to spend up here.

A Southern California user on sports.stackexchange described the exact trigger: summer highs near 100F in a garage-only space. That is a working environment for MDF and a routine one for this top, and the difference in long-term playability is not subtle.

Why an outdoor top is the correct garage answer

Indoor tables use an MDF top that absorbs moisture and warps when heat and cold cycle, and their steel legs corrode in damp air. This table replaces the MDF with a rigid composite surface and takes the frame to a weatherproof spec, so the top tolerates a wide temperature range while still folding into two halves.

Owners confirm the weather resistance works in practice for patios, garages and converted driveways. The recurring note is that the aluminum top plays noticeably differently from a premium indoor table. Expect a slightly slower, slightly less lively bounce. It is consistent, which matters more in a fluctuating environment.

Folding, wheels and the storage footprint

The table folds down and rolls on 3 inch wheels, and the listed storage dimensions are 60 inches long by 23 inches wide by 64 inches high. That vertical orientation against a garage wall is what makes the footprint manageable.

Playback dimensions of 66 by 60 by 64 inches mean one half folds flat as a solo practice return. In a garage with a workbench along one wall, that gives you a usable training surface without a partner.

Assembly, net and warranty trade-offs

At 90 percent pre-assembled, setup lands around ten minutes, and a 72 inch weatherproof net and post set with adjustable tension is included. That net matters outdoors, where a basic indoor clamp sags in humidity and stays sagging.

The 60-day warranty is the thinnest in the roundup, and reviewers note the outdoor-oriented design is heavier and costlier than indoor alternatives. You are paying for the material, and the warranty does not reflect that. If that is the dealbreaker, look for outdoor tables with a ten-year materials and workmanship warranty instead.

5. JOOLA Quadri 15mm – Best Value When Nesting Compactly Matters Most

The Quadri design solves a specific garage problem well: how to store a regulation-size table in a footprint that is genuinely small. Four nesting pieces interlock so the stored volume collapses far more than a simple two-half fold.

At 4.0 stars across 1320 reviews it sits lowest in the lineup, and the reviews explain exactly where the points come off. The price-to-quality ratio delights some owners outright, while others are frustrated by assembly and finishing. Know which one you are before it arrives.

The nesting design and the trolley systems

Separate 4-wheel trolley systems on each half are the feature that earns this table its place in a garage. At least one owner reports folding and moving it alone, and independent movement is what lets you park the car without unstacking the whole thing.

Reviewers do warn that the casters are basic office-grade hardware and struggle on uneven floors. A garage slab with a significant slope will make this harder than the review average implies, so check your floor before ordering.

Assembly is the real cost

Several hours, frequently two people, and pre-drilled holes that are often misaligned and need re-drilling. This is the opposite of the Quickplay tables above, and it is the most-reported complaint in the reviews.

Particle board edge trim that can crack or come loose and a centre hinge groove that deflects balls are the other recurring themes. The hinge groove is worth knowing about if you plan to practise technique seriously, because it changes ball trajectory at the seam.

Warranty, and the humidity question

One year of manufacturer coverage is better than the 60 or 90 days on several tables here. That matters more than usual, because reviewers specifically flag particle board tops warping in humid spaces, and a garage is frequently a humid space.

If your garage is unheated, treat this as an indoor-only table and keep it covered between sessions. Paddles and balls are not included. The 15mm surface itself is a solid entry tier for reliable ball bounce.

6. STIGA Space Saver – Best for Tight Garages and Fast Setup

This is the best-regarded table we tested, holding the highest average rating in the lineup at 4.6 stars across 974 reviews, with only 3 percent one-star feedback. It wins on fit rather than on feel, and fit is the deciding factor in most single-car garages.

Zero assembly is the headline. You unpack, unfold, attach the included net and post set, and play. For a garage table that will be set up and torn down repeatedly, that is worth more than a thicker top.

71 by 40.5 inches and what it costs in play

The playing surface is 71 by 40.5 inches, well under regulation, and that is the entire trade. Rallies that would run on a full table end early here, so it works for doubles-free family rallies and casual play rather than anything structured.

The 30 inch playing height is regulation, and that is where the table still feels like a real table rather than a toy. A lot of compact tables cut height first, and this one does not.

Vertical storage and the two-in-one trick

The folding vertical storage position frees up floor space when the table is not in use, which is what makes it viable in a bay that also holds a car. Push it flat to the wall, park the vehicle, pull it back out when the weather is good.

Separately, the two halves detach into multi-purpose tables for cards or entertaining. Reviewers find this genuinely useful rather than a gimmick, and in a garage that doubles as a man cave it earns its footprint twice over.

The warranty and MDF caution

Thirty days is the shortest warranty of any table here, and you should treat that as a signal. MDF tops are entry-level on bounce consistency, and MDF is the material that gives up first in a damp unheated garage.

Use it in a conditioned space, or cover it and accept a shorter service life. In a semi-open carport or a garage with wide seasonal swings, pick the outdoor composite table instead. The Space Saver is built for rooms, and it asks you to respect that.

7. MD Sports Foldable Table Tennis Set – Best Complete Bundle for a Game Room Garage

The MD Sports is the rare full-size table that includes everything. Two paddles, two balls, a net and a post set arrive in the box, so a garage set-up on a Saturday is an afternoon job rather than a shopping trip first.

At 4.2 stars across 651 reviews it is not the highest rated here, and the reviews are balanced around assembly complexity and the indoor-only rating. There is also no published warranty, which is the first thing to check before buying.

15mm playfield and real undercarriage depth

The 15mm reinforced playfield sits on reinforced steel leg frames with 1-1/5 inch table aprons. That apron depth is the specification that separates this from budget MDF tables, because it is what stops the surface flexing during a hard rally.

Reviewers report fewer wobble and finish complaints than cheaper competitors. At 15mm you are in the same tier as the JOOLA Quadri and a clear step above the 13mm entry tables for consistency.

Folding to a 16 inch footprint

Folded dimensions of 73 by 60 by 16 inches are genuinely slim for a regulation-size table. That is the number that decides whether it lives against a wall permanently or competes with your parking space.

At 114.6 pounds, repositioning takes two people. Plan the layout so the play position is where you set it up, and treat the fold as a seasonal or end-of-session action rather than a daily one.

Indoor use only, and what that means for a garage

The listing rates this table for indoor use only, and that is a real constraint in a garage. Damp, unheated and semi-open spaces are outside what the manufacturer will stand behind, even if the table survives physically.

Assembly is required and uses 3D interactive instructions in the free BILT app. Reviewers mention complexity, so budget an hour and a second pair of hands. No warranty is listed, which is why we would not rank it higher despite the strong spec sheet.

8. EastPoint Foldable Table Tennis Topper – Best When Your Garage Already Has a Table

Most garages already have something flat and long: a workbench, a sawhorse setup, a pool table or a dining table. If that is your situation, a topper is the most space-efficient answer available, because the folded footprint is a single 9 foot panel rather than two table halves.

It is 0.47 inches thick, which is thin in absolute terms, and at 4.0 stars across 399 reviews the rating reflects a product that performs as designed when the underlying surface cooperates.

The support requirement, stated plainly

You need a properly sized, fully supported underlying table. This is the one rule that decides whether a topper works, and it is the most common complaint in the reviews: wherever the surface beneath is unsupported, the centre sags.

Measure your surface before buying and check the legs are spaced so the topper corners land on structure. A pool table with a centre pocket cutout, for example, will not work without a support board.

Foam pads and where they actually go

The included foam pads are small and owners report they need repositioning toward the outer edges. Sitting them near the hinges creates a bump you will feel in every rally, so place them at the support points instead of where the instructions suggest.

Net, post system and foam pads are all included. Paddles and balls are not. The steel net hardware is the one part that looks properly specified for the price.

Packaging and arrival damage

EastPoint double-boxes this top, and reviewers specifically praise the packaging for a heavy panel. Even so, some units arrive with torn or delaminated laminate at the edges, so inspect it before assembling and before the return window closes.

Two people are needed to unfold it, and it folds flat for storage in dorms, apartments and garages. In a garage that must also host a vehicle, one flat stored panel is a real advantage over two bulky halves.

9. Best Choice Products Portable 6×3 – Best for One-Person Carry and Uneven Floors

The adjustable feet and leg locks are the reason this table earns a place in a garage specifically. Reviewers credit them with holding a level surface on garage and patio floors, and an uneven slab is the single most common complaint on lighter tables.

At 34 pounds with built-in carrying handles, it is the second-lightest option here, and the included carrying bag means the folded table disappears into a closet between sessions.

Adjustable feet on a garage slab

Garage floors slope toward the drain and are rarely flat. Adjustable feet with secure leg locks are the cheapest fix for that, and feedback confirms they work well enough to keep rallies honest on a surface other tables wobble on.

Leg locks matter as much as the feet themselves. Without them, a folding table develops lateral wobble the moment someone leans on it for a hard shot.

What the 6×3 size means for practice

Half regulation size limits competitive rallies, and buyers treat this as a portable apartment table rather than a serious one. The MDF top is thinner and less consistent than full-size tables, so expect a slower game.

For a garage game room where the goal is family fun and keeping the kids active indoors, that is a fair trade at 34 pounds. For someone building skill, it is not the place to start.

Warranty terms worth reading twice

The 60-day warranty exists, but returns are shipped at the customer expense unless the fault is the seller’s. That is a meaningfully worse service commitment than a manufacturer who covers return freight, and it should factor into your decision.

The box is complete: net, two balls and two high-grip solid wood paddles. Dimensions are 72 by 36 by 30 inches, and it is also available in blue and an American flag colourway if appearance matters in a visible garage.

10. Generic Folding Rolling 108×60 – Best Casters for Rolling the Table Out of the Way

This is the table to look at if your garage has to serve two masters. The 2 inch lockable casters are specified clearly and the fold-up design lets the whole table move out of the parking bay in one motion rather than half at a time.

It is also the least documented product in the roundup, with no model number and no published warranty, so buy it with the understanding that you are the first line of support if something fails.

Casters and the fold-away-to-park-the-car workflow

This is the workflow r/tabletennis owners ask about most often, and it is why caster specification deserves the attention it gets. Lockable casters on 2 inch wheels roll a 134 pound table across a concrete slab, and the locks stop it drifting on the typical garage slope.

Fold the table, unlock, roll it to the wall, lock it, park the car. Reverse on a sunny day. It is unglamorous, and it is the difference between owning a garage table and actually playing on one.

Frame and top specification

The playing surface is 0.63 inch engineered wood, which is roughly 16mm, on an alloy steel frame at official 108 by 60 by 30 inch dimensions. That is a competitive thickness tier for the specification sheet.

Owners report a solid full-size table with a folding storage mode and casters that make garage practice practical. The bounce suits recreational and family play rather than club training.

What buying an unbranded listing means

There is no manufacturer warranty and no model documentation, and the 116-review base is the smallest here, so long-term durability feedback simply does not exist yet. That is a data gap, not a defect, but you are buying without history.

The offsetting positives are real: full regulation dimensions, a genuine steel frame, lockable casters, and a complete accessory bundle with two paddles, two balls, a net and a post set. Check the return window carefully and inspect on arrival.

Garage Clearance Checklist: Five Measurements Before You Buy

Measure before you order. This is the step that prevents the most common disappointment, which is a table that physically fits and then occupies the entire bay.

1. Playing clearance. A regulation 108 by 60 inch table needs roughly 16 feet of total length and 8 feet of width for comfortable play. If your bay cannot give that up permanently, plan on a rollaway or foldable design from the start.

2. Bay width and depth. Measure the narrowest point, including wall-mounted shelves, a workbench and any parked vehicle. The table needs a clear rectangle, not just a nominal bay size.

3. The garage door opening. This is the one people forget. A 5 foot table half has to come through the door, so check the clear opening between the door and the track hardware, not the door width on the spec sheet.

4. Ceiling height for a folded table. Vertical storage needs headroom. The STIGA XTR stores at 64 inches high and the MD Sports folds to 16 inches in depth, so match the storage orientation to your clear height rather than assuming either works.

5. Aisle width for rolling away. If the car still needs to park inside, measure the aisle the table has to travel through on its casters. Aisle narrower than the table width means it will never be rolled out again.

If your garage is attached to the house, consider how much sound and impact transfers through the shared wall before you commit to daily play. Our garage door insulation guide covers the sound side of that problem, and it also bears on the temperature swings discussed next.

Indoor vs Outdoor Tables in an Unheated Garage

Concrete is hard on paddles, balls and table legs, and it is worth putting something under the table footprint. The question comes up constantly in forum threads and almost no editorial roundup answers it.

Interlocking foam tiles give the best caster behaviour and the most even surface, and they protect the leg plates from point loading on a slab. They also add a little give, which is good for a small table on an adjustable-foot base.

Rubber horse stall mats are the common garage answer. They take point loads well and cost less per square foot, but caster roll is noticeably heavier on them, so braked casters matter more once the mats go down.

Roll-up mats are the cleanest option if you want to park the car over the same floor. They lift away in seconds and cause no permanent change to the bay.

Whatever you choose, lay it under the full footprint plus the caster travel path, not just under the table itself. A half-covered caster path is how a table ends up sitting slightly off-level, which is the most common cause of the wobble complaints in the reviews above.

If the bay doubles as a workspace, a full-coverage floor also protects against dropped tools and paint. Related connectivity and network gear guides cover the other half of turning a garage into a usable play space.

How to Choose a Ping Pong Table for a Garage

Material first, always. Aluminum-plastic composite or resin for unheated, semi-open and carport spaces. MDF only where temperature and humidity are controlled. This single decision eliminates most of the wrong purchases in this category.

Storage mode second. Rollaway halves on lockable casters if the car still parks inside. Vertical folding if the table lives flat against a wall. A conversion top if the garage already has a table. Full size stationary only if you have a bay you can dedicate.

Climate third. The same triad, in the order buyers should apply it. Material, storage, climate. Get those three right and the rest of the specification barely matters.

Thickness, with context. Indoor tiers run 13mm entry, 15mm standard, 19mm better, 25mm club. Outdoor tops are not on that scale at all, so never compare an outdoor 6mm composite against an indoor 25mm MDF top and pick the MDF.

Weight as a durability proxy. Heavier tables generally mean thicker frames, thicker legs and better undercarriages, but weight also decides whether you can move it alone. In a garage, that second question matters as much as the first.

Undercarriage and aprons. The steel apron under the top is what controls flex during a rally. The MD Sports lists 1-1/5 inch aprons, the STIGA Advantage uses a 0.75 inch steel tube apron, and both are reasons those tables feel steadier than their price suggests.

Caster size and locks. 2 inch casters cover lighter tables, 3 inch wheels roll over slab cracks and thresholds better. Lockable casters are non-negotiable on a sloped garage floor, and brakes matter once mats are underfoot.

Net and clamp hardware. Basic clamp-style net sets are fine indoors and sag in humidity. Weatherproof net sets with adjustable tension are the correct choice for anything living in an unconditioned space.

Assembly burden. Tables arriving 95 or 90 percent pre-assembled set up in about ten minutes. Laborious multi-piece designs can take several hours and frequently need re-drilling. Factor this in honestly, because setup friction predicts how often the table stays folded.

Warranty length. It ranges from 30 days to a year on the indoor tables here, and ten years on materials and workmanship is the standard on premium outdoor tables. A five-to-ten year purchase deserves coverage that matches it.

What to Avoid in a Garage Ping Pong Table

MDF tops in unheated spaces. This is the number one thing to avoid and it is the mistake most first-time buyers make. The table looks fine on delivery day and degrades over one or two seasonal cycles.

13mm tops in a space that gets damp. Thirteen millimeters is already the entry tier for indoor play. In a garage with real humidity, it has no margin left.

Particle board edging and tops. Reviewers on several tables here report edge trim cracking, warping in humid spaces and centre seams that deflect balls. It is a finishing shortcut with a real service life cost.

Listings with no warranty and no model number. Low-rated listings circulate constantly in this category, and an unbranded listing with no documentation gives you no recourse when a caster or top fails.

Unsupported topper surfaces. A conversion top on an undersized or unsupported table sags in the centre. Check the support points before the topper arrives, not after.

Buying a full-size table for a bay that cannot hold one. A table that permanently blocks the car is a table that stops being played on. Measure first.

Frequently Asked Questions

Which Ping Pong Table for a Garage Should You Buy in 2026?

Start with the climate, not the brand. In an unheated, semi-open or carport space, the STIGA XTR Outdoor is the pick because a waterproof aluminum composite top and a rust-resistant frame are the only construction here rated for the environment you actually have.

If the garage is insulated and conditioned, the JOOLA Inside Professional is our editor’s choice. The 15mm MDF top gives the most consistent bounce in this roundup, and it folds and locks upright so the car can still come inside.

For tight bays, the STIGA Space Saver at 71 by 40.5 inches folds flat to a wall with no assembly required. For one-person carrying, the GoSports Mid-Size set at 30 pounds comes with a net, paddles and balls in the same box. For a carport-level budget on a full-size surface, the MD Sports bundle folds to a 16 inch footprint.

Whichever one you choose, measure the bay and the door opening before it ships. The right table in the wrong footprint is the one that stays folded forever, and the best ping pong tables for garages are only the best if you can actually get them played on.